Changes to Step #30
Edit by Miroslav Djuric —
Edit approved by Miroslav Djuric
- Before
- After
- Unchanged
Step Lines
[* black] [* green] The battery can be easily replaced by opening the compartment with your thumbnail. [* green] The rear cover comes off with minimal unscrewing/desoldering (for this kind of device), allowing you to access the motherboard. [* red] The D600 has several wires that need to be desoldered in order to take it apart. [* red] Close to 9,000 screws hold the device together. [* red] Components are very tightly packed, making it more difficult to disconnect and remove them. [* red] For absolute safety, you need to discharge the flash capacitor, otherwise you risk accidentally killing your camera. |
[* black] [* green] The battery can be easily replaced by opening the compartment with your thumbnail. [* green] The rear cover comes off with minimal unscrewing/desoldering (for this kind of device), allowing you to access the motherboard. [* red] The D600 has several wires that need to be desoldered in order to take it apart. [* red] Close to 9,000 screws hold the device together. [* red] Components are very tightly packed, making it more difficult to disconnect and remove them. [* red] For absolute safety, you need to discharge the flash capacitor, otherwise you risk accidentally killing your camera. |