Skip to main content

Fix Your Stuff

Right to Repair


Changes to Step #2

Edit by Kenneth Kassing

Edit approved by Sam Goldheart


Step Lines

[* black] Remove the following screws from the metal bracket between the rear facing flash and camera windows:
[* red] One 2.9 mm standoff screw
[* icon_note] This screw has a Phillips bit pattern, but we found the best removal tool to use is a 2.5 mm flathead driver.
[* orange] One 1.6 mm Phillips screw
[* black] NOTE: Add an instruction to remove the screw on the power button bracket. (The screw is already removed in this image, but was in previous images.)