Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Walter Galan

Edit approved by Walter Galan

Before
After
Unchanged

Step Lines

[* black] Remove the following screws from the metal bracket between the rear facing flash and camera windows:
[* red] SingleOne 2.9 mm standoff screw
[* icon_note] While these screws haveThis screw has a Phillips bit pattern, but we found the best tool to beuse is a 2.5 mm flathead driver.
[* orange] SingleOne 1.6 mm Phillips screw
[* red] SingleOne 2.9 mm standoff screw
[* icon_note] While these screws haveThis screw has a Phillips bit pattern, but we found the best tool to beuse is a 2.5 mm flathead driver.
[* orange] SingleOne 1.6 mm Phillips screw