Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Andrew Optimus Goldheart

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

[* black] Remove the following screws from the metal bracket between the rear facing flash and camera windows:
[* red] Single 2.9 mm Phillips standoffstandoff screw
[* icon_note] These screws have a Phillips bit pattern, but we found a 2.5 mm flathead driver works best.
[* red] Single 2.9 mm Phillips standoffstandoff screw
[* icon_note] These screws have a Phillips bit pattern, but we found a 2.5 mm flathead driver works best.
[* orange] Single 1.6 mm Phillips screw