Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Miroslav Djuric

Edit approved by Miroslav Djuric

Before
After
Unchanged

Step Lines

[* black] Gently peel the speaker assembly away from the Lightning connector ribbon cable.
[* icon_note] If you are replacing the lighteningLightning connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.
[* icon_note] If you are replacing the lighteningLightning connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.