Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Remove the following screws securing the Lightning connector assembly to the rear case:
[* [* red] One 2.9 mm Phillips screw
[*

[* icon_reminder] During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.
[*
orange] One 1.5 mm Phillips screw
[*

[*
yellow] Two 3.3 mm Phillips screws
[* [* red] One 2.9 mm Phillips screw
[*

[* icon_reminder] During re-installation, make sure that the headphone jack's plastic protrusion lies above the metal washer.
[*
orange] One 1.5 mm Phillips screw
[*

[*
yellow] Two 3.3 mm Phillips screws