Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #6

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Angle the Lightning connector assembly and pull it out of its recess.
[* red] Remove the four metal washers and set them aside for reassembly.
[* icon_reminder] Before reassembly, use the opening tool or the flat end of a spudger to remove all adhesive residue from the rear case. You can use high-concentration isopropyl alcohol to help with the stubborn spots.

Image 3

No previous image

Added