Skip to main content

Changes to Step #2

Edit by Arthur Shi

Edit approved by Arthur Shi


Step Lines

+[* black] Remove the following screws securing the speaker enclosure to the rear case:
+ [* red] One 2.5 mm Phillips screw
+ [* orange] One 1.5 mm Phillips screw
+ [* yellow] One 2.5 mm Phillips screw
+ [* green] One 2.7 mm standoff screw
+ [* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
+ [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

Image 1

No previous image