Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #13

Edit by Jasper Fleischhauer

Edit approved by Jasper Fleischhauer

Before
After
Unchanged

Step Lines

[title] Removing the front panel assembly cable bracket screws
[* black] Remove the following screws securing the front panel assembly cable bracket to the logic board:
[* red] Two 1.2 mm Phillips screws
[* orange] One 1.6 mm Phillips screw
[* icon_note] This screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing, and make sure it gets back into the right placeā€”a magnetized screw may interfere with the compass.