Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #7

Edit by David Hodson

Edit approved by David Hodson

Before
After
Unchanged

Step Lines

[* icon_note] Make sure the suction cup is firmly attached to the displayfront panel assembly.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the displayfront panel assembly up from the rear case.
[* black] With a plastic opening tool, begin to gently pry the displayfront panel assembly up from the rear case.
[* icon_note] There are several clips attaching the displayfront panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the displayfront panel assembly.
[* icon_note] Make sure the suction cup is firmly attached to the displayfront panel assembly.
[* black] While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the displayfront panel assembly up from the rear case.
[* black] With a plastic opening tool, begin to gently pry the displayfront panel assembly up from the rear case.
[* icon_note] There are several clips attaching the displayfront panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the displayfront panel assembly.