Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Thibaut Pillot

Edit approved by Thibaut Pillot

Before
After
Unchanged

Step Lines

[* black] Locate and removeRemove the two 10mm Phillips #2 screws on the back of the green printed circuit board.
[* black] Locate and removeRemove the two 10mm Phillips #2 screws on the back of the green printed circuit board.
[* black] If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection.