Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Thomas Oder

Edit approved by Thomas Oder

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereLocate and remove the two 10mm Phillips head screws on the back of the green printed circuit board.
[* black] If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection
.
[* black] Insert wisdom hereLocate and remove the two 10mm Phillips head screws on the back of the green printed circuit board.
[* black] If the circuit board needs to be replaced, locate where the two white wires are soldered to the board, and de-solder the connection
.