Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Thibaut Pillot

Edit approved by Thibaut Pillot

Before
After
Unchanged

Step Lines

[* red] Locate the 5 screws holding the back of the handle to the stick vac.
[* black]
Remove the four 12mm Phillips screws , and the one large 32mm Phillips head bolt from the vacuum handle.
[* red] Locate the 5 screws holding the back of the handle to the stick vac.
[* black]
Remove the four 12mm Phillips screws , and the one large 32mm Phillips head bolt from the vacuum handle.
[* black] Pull up on the back cover of the vacuum handle and remove it.