Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Dominic Simpson

Edit approved by Dominic Simpson

Before
After
Unchanged

Step Lines

[* red] Remove the two robber rubber rubber feet with arrows by them on the back side to uncover two screws. Using the same screwdriver, unscrew the 13 circled screws. The four near the hard drive will be silver and 4.4mm long. The remaining nine are black and 6.5mm long. Then remove the back casing using a pry tool if needed.
[* red] Remove the two robber rubber rubber feet with arrows by them on the back side to uncover two screws. Using the same screwdriver, unscrew the 13 circled screws. The four near the hard drive will be silver and 4.4mm long. The remaining nine are black and 6.5mm long. Then remove the back casing using a pry tool if needed.