Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Connor Gilliard

Edit approved by Connor Gilliard

Before
After
Unchanged

Step Lines

[* red] Remove the two robber rubber feet with arrows by them on the back side to uncover two screws. UnscrewUsing the same screwdriver, unscrew the 11 circled screwsscrews. The two near the hard drive will be silver and 4.4mm long. The remaining nine are black and 6.5mm long. Then remove the back casing withusing a pry tool if needed.
[* red] Remove the two robber rubber feet with arrows by them on the back side to uncover two screws. UnscrewUsing the same screwdriver, unscrew the 11 circled screwsscrews. The two near the hard drive will be silver and 4.4mm long. The remaining nine are black and 6.5mm long. Then remove the back casing withusing a pry tool if needed.