Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Brian Briggs

Edit approved by Brian Briggs

Before
After
Unchanged

Step Lines

[* red] Remove the two rubber feet with arrows by them on the back side to uncover two screws. Using
[* orange] Unscrew
the same screwdriver, unscrew the thirteen circled screws. The four silver 4.4mm long screws near the hard drive will be silver and 4.4mm long. Thedrive.
[* yellow] Unscrew the
remaining nine are black and 6.5mm longlong screws. Then remove the back casing using a pry tool if needed.
[* red] Remove the two rubber feet with arrows by them on the back side to uncover two screws. Using
[* orange] Unscrew
the same screwdriver, unscrew the thirteen circled screws. The four silver 4.4mm long screws near the hard drive will be silver and 4.4mm long. Thedrive.
[* yellow] Unscrew the
remaining nine are black and 6.5mm longlong screws. Then remove the back casing using a pry tool if needed.

Image 1

Old Version

New Version