Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Faris Rezwan

Edit approved by Faris Rezwan

Before
After
Unchanged

Step Lines

[* black] Remove the 2.0 mm Phillips screws on both sides of the camera using the J00 bit from the 54 bit Driver Kit
[* blackicon_note] There will be 4 total 2.0mm screws that need to be removed, 2 on each side
[* blackicon_note] There will be 4 total 2.0mm screws that need to be removed, 2 on each side