Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Julie Pahukoa

Edit approved by Julie Pahukoa

Before
After
Unchanged

Step Lines

[* black] Remove thered] Using a Phillips #00 driver, remove the four 2.0 mm Phillips screws on both sides of the camera using the J00 bit from the 54 bit Driver Kit
[* icon_note]
housing. There will be 4 total 2.0mmare two screws that need to be removed, 2 on each sideeither side.
[* black] Remove thered] Using a Phillips #00 driver, remove the four 2.0 mm Phillips screws on both sides of the camera using the J00 bit from the 54 bit Driver Kit
[* icon_note]
housing. There will be 4 total 2.0mmare two screws that need to be removed, 2 on each sideeither side.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Deleted