Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Thibaut Pillot

Edit approved by Thibaut Pillot

Before
After
Unchanged

Step Lines

[* black] Locate and unscrewUnscrew single 12.0 mm Phillips #2 screw on the right side of the bottom of the vacuum head.
[* black] Locate and unscrewUnscrew single 12.0 mm Phillips #2 screw on the right side of the bottom of the vacuum head.
[* black] Lift and pull up on the brush retention clip.
[* black] Pull brush up and out to replace.