Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Althea McDavid

Edit approved by Althea McDavid

Before
After
Unchanged

Step Lines

[* red] Unscrew the two (2) 6.5mm PH00 Phillips head screws in the top corners of the back cover. These may be hidden by a rubber stopper. To remove, use a plastic spudger to pry the stopper outout.
[* orange] Unscrew the two (2) center top and two (2) side 8.95mm PH00 Phillips head screws.
[* yellow] Unscrew the four (4) 6.25mm PH00 Phillips head screws along the bottom. These may also be hidden by a rubber stopper. To remove, use a plastic spudger.
[* red] Unscrew the two (2) 6.5mm PH00 Phillips head screws in the top corners of the back cover. These may be hidden by a rubber stopper. To remove, use a plastic spudger to pry the stopper outout.
[* orange] Unscrew the two (2) center top and two (2) side 8.95mm PH00 Phillips head screws.
[* yellow] Unscrew the four (4) 6.25mm PH00 Phillips head screws along the bottom. These may also be hidden by a rubber stopper. To remove, use a plastic spudger.