Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Althea McDavid

Edit approved by Althea McDavid

Before
After
Unchanged

Step Lines

[* red] Unscrew the two (2) 6.5mm phillipsPhillips head screws in the top cornerscorners of the back cover. These may be hidden by a rubber stopper. To removeremove, use a plastic spudgerspudger to pry the stopper out
[* orange] Unscrew the two (2) center top and two (2) side 8.95mm Phillips head screws
.
[* yellow] Unscrew the four (4) 6.25mm phillipsPhillips head screws along the bottom. These may also be hidden by a rubber stopper. To removeremove, use a plastic spudger.
[* orange] Unscrew the (2) center top and (2) side 8.95mm phillips head screws.
[* icon_note] Make sure to keep the screws organized as you move on.
[* red] Unscrew the two (2) 6.5mm phillipsPhillips head screws in the top cornerscorners of the back cover. These may be hidden by a rubber stopper. To removeremove, use a plastic spudgerspudger to pry the stopper out
[* orange] Unscrew the two (2) center top and two (2) side 8.95mm Phillips head screws
.
[* yellow] Unscrew the four (4) 6.25mm phillipsPhillips head screws along the bottom. These may also be hidden by a rubber stopper. To removeremove, use a plastic spudger.
[* orange] Unscrew the (2) center top and (2) side 8.95mm phillips head screws.
[* icon_note] Make sure to keep the screws organized as you move on.