Changes to Step #2
Edit by Johnathan Hammond —
Edit approved by Johnathan Hammond
- Before
- After
- Unchanged
Step Lines
| [* icon_note] NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips. |
| [* icon_note] NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). |
| [* black] Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. |
| [* black] Remove the module from the connector. |
| [* icon_reminder] If this is all you are doing Follow Step In Reverse if not Go to Next Step. |
Image 1
No previous image
Added