Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #2

Edit by Matthew Selting

Edit approved by Matthew Selting

Before
After
Unchanged

Step Lines

[* black] Remove the 7mm J1S000 bit Phillips #1 screw from propeller stop.
[* icon_caution] Be sure to apply adequate pressure when removing the screw to prevent stripping it out.
[* black] Remove the 7mm J1S000 bit Phillips #1 screw from propeller stop.
[* icon_caution] Be sure to apply adequate pressure when removing the screw to prevent stripping it out.