Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by John Russell

Edit approved by John Russell

Before
After
Unchanged

Step Lines

[* icon_note] Make sure the projector is unplugged before starting
[* black] Place the projector upside down theto access the screws on the bottom.
[* red] Remove the five 7mm long #3 Phillipsphillips head screws using a screwdriver at least 2 inches long.
[* black] Place the projector upside down theto access the screws on the bottom.
[* red] Remove the five 7mm long #3 Phillipsphillips head screws using a screwdriver at least 2 inches long.