Skip to main content

Changes to Step #4

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit


Step Lines

[* black] Disconnect the headphone jack flex cable with the flat end of a spudger.
[* black] Use an opening pick to pry out the motherboard until you can get a good grip.
[* icon_caution] Both camera are still attached to the motherboard. Don't damage them while you remove it.
[* black] Remove the motherboard.
[* icon_note] If you want to replace your motherboard you need to disconnect both cameras and transfer them to your spare part.
[* icon_reminder] On the back of the motherboard there are thermal pads (pink rubber-like gobs) for heat dissipation. If these thermal pads broke or are too dried out you might need to [guide|114101|apply new thermal pads|new_window=true] on the new display assembly or the motherboard.