Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #1

Edit by Ryan Silberger

Edit approved by Ryan Silberger

Before
After
Unchanged

Step Lines

[* black] With all of the before mentioned components removed, you can now start removing your motherboard. We recommend taking a picture of the back of the motherboard to keep track of which screws go where.
[* blackred] Use the same phillips head screw driver as previous steps to remove the highlighted eleven 4 mm red marked screws from the motherboard.
[* blackorange] Remove the two 8 mm orange marked screws and keep them separate. They are slightly longer than the rest of your screws and will need to be returned to their selective places.
[* blackyellow] The two 4 mm yellow highlightedmarked screws can be removed now, or in step 10. They are specific to the connection they are attached to and will need to be kept separate also.
[* blackred] Use the same phillips head screw driver as previous steps to remove the highlighted eleven 4 mm red marked screws from the motherboard.
[* blackorange] Remove the two 8 mm orange marked screws and keep them separate. They are slightly longer than the rest of your screws and will need to be returned to their selective places.
[* blackyellow] The two 4 mm yellow highlightedmarked screws can be removed now, or in step 10. They are specific to the connection they are attached to and will need to be kept separate also.