Changes to Step #10
Edit by Andrew Bookholt —
- Before
- After
- Unchanged
Step Lines
| [* black] Disconnect the right fan by pulling its connector away from the socket on the logic board. | |
| - | [* icon_note] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board. |
| + | [* icon_note] When pulling this connector away from its socket, it is helpful to use your fingernails to pull on the ears at each side of the connector. |
| + | [* icon_caution] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board. |