Changes to Step #6
Edit by Andrew Bookholt —
- Before
- After
- Unchanged
Step Lines
| [* black] Disconnect both of the following cables from the logic board: | |
| [* red] Left fan cable. | |
| [* orange] Inverter cable. | |
| + | [* icon_caution] Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board. |
| [* icon_note] When pulling these connectors away from their sockets, it is helpful to use your fingernails to pull on the ears at each side of the connector. |