Skip to main content

Changes to Step #4

Edit by Marty Rippens

Edit approved by Marty Rippens

Before
After
Unchanged

Step Lines

[* icon_note] Carefully undo the ribbon wire for the fingerprint scanner before full removal of the backing.
-[* black] There are two 3.4mm JIS 00 screws that hold the wire in place, one may be under a lock sticker. Remove the screws with the JIS 00 screwdriver.
+[* red] There are two 3.4mm JIS 00 screws that hold the wire in place, one may be under a lock sticker. Remove the screws with the JIS 00 screwdriver.