Skip to main content

Changes to Step #4

Edit by Olivia Wolf

Edit approved by Olivia Wolf

Before
After
Unchanged

Step Lines

-[* icon_note] Carefully undo the ribbon wire for the fingerprint scanner before fully removing the backing.
-[* black] There are two 3.4mm Philips J00 screws that hold the wire in place, one may be under a lock sticker. Remove the screws using the J00 Philips screwdriver.
+[* icon_note] Carefully undo the ribbon wire for the fingerprint scanner before full removal of the backing.
+[* black] There are two 3.4mm Philips J00 screws that hold the wire in place, one may be under a lock sticker. Remove the screws with the J00 Philips screwdriver.