Skip to main content

Changes to Step #4

Edit by Olivia Wolf

Edit approved by Olivia Wolf

Before
After
Unchanged

Step Lines

[* icon_note] Carefully undo the ribbon wire for the fingerprint scanner before fully removing the backing.
-[* black] There are two 3.4mm Philips J00 screws that hold the wire in place, one may be under a lock sticker. You will be using a J00 Phillips screwdriver to remove the screws.
+[* black] There are two 3.4mm Philips J00 screws that hold the wire in place, one may be under a lock sticker. Remove the screws using the J00 Philips screwdriver.