Skip to main content

Changes to Step #13

Edit by Logan Kennedy

Edit declined by Andrew Optimus Goldheart

Deleted
Added
Unchanged

Step Lines

[* icon_note] Make sure that each adhesive strip is placed in the correct location and orientation before peeling the backing.
[* black] Peel the brown backing up off each adhesive strip.
[* icon_reminder] Some of the adhesive strips are quite small and may require some patience to peel the backing.
[* black] Attaching a new front panel can require a fair amount of weight due to the stiffness of the new digitizer cable. We suggest putting something heavy and flat on the device to ensure adhesion.