Skip to main content

Changes to Step #10

Edit by Sam Goldheart

Edit approved by Sam Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] Lay the thin T-shaped adhesive strip flush withbetween the bottom edge of the top portioninner frame of the front panel, underneathpanel and the camera mounting bracket. The longest edge should be flush with the inner frame.
[* black] Lay the thin T-shaped adhesive strip flush withbetween the bottom edge of the top portioninner frame of the front panel, underneathpanel and the camera mounting bracket. The longest edge should be flush with the inner frame.