Skip to main content

Changes to Step #5

Edit by Walter Galan

Edit approved by Walter Galan


Step Lines

[* icon_note] In the following steps, you will be placing the remaining pieces of adhesive on the front panel.
[* icon_reminder] '''Do not peel the brown backing off the strips just yet'''.
[* black] Place the largest L-shaped adhesive strip on the top left corner of the front panel.
[* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.
[* icon_note] Do not remove the backing until you have placed every strip on the front panel.