Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

-[* red] Remove the two #000 Phillips screws.
-[* black] Disconnect the loudspeaker flex connecetor with a spudger.
+[* red] Remove the two Phillips #000 screws.
+[* black] Use the flat end a spudger to disconnect the loudspeaker flex connector.
[* black] Use the pointy end of a spudger to pry out the daughterboard.
- [* icon_caution] There are some small electronic parts on the bottom of the daughterboard. Don't damage them whilst removing it. A save prying point is e.g. next to the red rubber gasket.
[* black] Remove the daughterboard.