Skip to main content

Changes to Step #1

Edit by David42

Edit approved by David42

Deleted
Added
Unchanged

Step Lines

[title] Remove the colour wheel
[* red] To make a coloured image, the light shines through this spinning colour wheel then onto a Digital Micromirror Device (DMD) with 1024*768 small mirrors that move to switch each pixel on or off.
[* orange] Remove these 2 silver 6mm Philips #1 screws to detach the colour wheel.
[* black] To remove the colour wheel you will need to cut a cable tie and move the wires to the side.
[* black] Then gently remove the delicate glass colour wheel.

Image 1

Old Version

New Version

Image 2

Old Version

New Version