Skip to main content

Changes to Step #12

Edit by David42

Edit approved by David42

Deleted
Added
Unchanged

Step Lines

[title] Remove the DMD chip
[* red] Remove these 2 Philips #2 screws holding the DMD heatsink. Two washers will drop down behind the heatsink when you remove these bolts. You will be able to retrieve these when you have removed the heatsink.
[* orange] Peel back this sticky card to free the heatsink.
[* black] Pull back the heatsink then remove the DMD module
[* green] To remove the DMD chip, turn this screw half a turn anticlockwise.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added