Skip to main content

Changes to Step #11

Edit by David42

Edit approved by David42

Deleted
Added
Unchanged

Step Lines

[title] A look at the separated optical parts
[* black] The first picture shows the front lens separated from
inside the DMD optical section.
[* black] The second picture is a close up of the small lens at the back of the front lens section.
unit
[* red] The third picture is a first look inside the amazingly complicated DMD optical section: The light comes in from the colour wheel through a very small hole here.
[* orange] It goes through a small lens here.
[* yellow] Then it
goes through this lens
[* yellowgreen] to get reflected off this mirror onto the DMD chip at the back.
[* greenlight_blue] The DMD chip reflects selected pixels through
[* light_blueblue] this strange half lens.
[* blueviolet] The black box on the side is just another cooling fan.
[title] A look at the separated optical parts
[* black] The first picture shows the front lens separated from
inside the DMD optical section.
[* black] The second picture is a close up of the small lens at the back of the front lens section.
unit
[* red] The third picture is a first look inside the amazingly complicated DMD optical section: The light comes in from the colour wheel through a very small hole here.
[* orange] It goes through a small lens here.
[* yellow] Then it
goes through this lens
[* yellowgreen] to get reflected off this mirror onto the DMD chip at the back.
[* greenlight_blue] The DMD chip reflects selected pixels through
[* light_blueblue] this strange half lens.
[* blueviolet] The black box on the side is just another cooling fan.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version