Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* red] Fully loosen the three captiveRemove the two T8 screws securingfrom the exhaust port end of the heat sink over the GPUsink.
[* orange] RemoveLoosen, but do not remove, the two 5.4 mmfour captive T8 screws securing the heat pipe toCPU end of the logic boardheat sink.
[* red] Fully loosen the three captiveRemove the two T8 screws securingfrom the exhaust port end of the heat sink over the GPUsink.
[* orange] RemoveLoosen, but do not remove, the two 5.4 mmfour captive T8 screws securing the heat pipe toCPU end of the logic boardheat sink.

Image 1

Deleted