Skip to main content

Changes to Step #3

Edit by Nicholas Greco

Edit approved by Nicholas Greco

Before
After
Unchanged

Step Lines

-[* red] Using the T9 Torx screwdriver, remove the ( mm) screw.
-[* black] Grasp the black, elastic band firmly and pull out and away from the white plastic pulley.
-[* black] You should now be able to lift the printhead from the printer
+[* red] Place the T9 Torx screwdriver in the screw slot and turn counterclockwise to remove the single 12 mm screw.
+[* black] Grasp the black, elastic band firmly and pull out and away from the white plastic pulley; the printhead can now be lifted out of the printer.