Skip to main content

Changes to Step #2

Edit by Kristen Gismondi

Edit approved by Kristen Gismondi

Before
After
Unchanged

Step Lines

-[* red] Using the Blunt Tweezers, remove the spring via the same method outlined in the previous step.
+[* red] Using the blunt tweezers, remove the spring via the same method outlined in the previous step.
[* black] Firmly grasp the print rail and gently guide it out of the slot in the fuser assembly by pulling away from the printer body.
[* icon_note] Because this rail is what guides the printhead, it will be greased. Dress accordingly to avoid unwanted stains.
[* icon_note] Because the printhead sits on this rail, be sure to brace the printhead as you retract the print rail to avoid any unwanted damage.