Skip to main content

Changes to Step #2

Edit by Nicholas Greco

Edit approved by Nicholas Greco


Step Lines

-[* black] Insert wisdom here.
+[* red] Using the Blunt Tweezers, remove the spring via the same method outlined in the previous step.
+[* black] Firmly grasp the print rail and gently pull it out of its slot in the fuser assembly.
+[* icon_note] Because this rail is what guides the printhead, it will be greased. Dress accordingly to avoid unwanted stains.
+[* icon_note] Because the printhead sits on this rail, be sure to brace the printhead as you retract the print rail to avoid any unwanted damage.

Image 1

Old Version

New Version