Skip to main content

Changes to Step #7

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

+[* black] Use the flat end of a spudger to pry up and loosen the right edge of the daughterboard.
+[* black] Swing the daughterboard to the left to move it out of its recess.
+[* icon_caution] Do not attempt to remove the daughterboard. It is still attached to the frame.
+[* icon_reminder] During reassembly, be sure to [https://d3nevzfk7ii3be.cloudfront.net/igi/4eMXVS2Wl1IIS4RQ|route the white antenna cable through the daughterboard notch and wrap the black antenna cable around the screw post|new_window=true].

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added