Skip to main content

Changes to Step #5

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

+[* black] Use the edge of an opening tool to carefully push the vibration motor connector out of its socket.
+ [* icon_caution] Do not pull the connector by the wires. Doing so will most likely break the connector.
+[* icon_reminder] To reinstall the connector, use the opening tool and the tip of a spudger [https://d3nevzfk7ii3be.cloudfront.net/igi/2s3MqotDUNGFmyuB|to help align the connector|new_window=true], then gently push the connector in [https://d3nevzfk7ii3be.cloudfront.net/igi/xcETCjOjYBK5kZUV|with the opening tool while using the spudger to brace against the socket|new_window=true].

Image 1

No previous image

Added

Image 2

No previous image

Added