Skip to main content

Changes to Step #4

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[* black] Gently lift the daughterboard out of the device.
-[* icon_note] To replace the charging assembly, you will need to replace the entire daughterboard.
+[* black] Use the point of a spudger to pry up and disconnect the interconnect cable from the bottom daughterboard.
+[* black] Continue peeling the interconnect cable from the bottom daughterboard.
+[* black] Remove the interconnect cable.

Image 1

Old Version

New Version

Image 2

No previous image

Added