Skip to main content

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* black] Use the point of a spudger to pry up and disconnect the interconnect cable from the motherboard.
[* blackicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the socket.
[* blackicon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the socket.