Skip to main content

Changes to Step #3

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[* red] Usingblack] Use the point of a blue plastic opening tool, detachspudger to pry up and disconnect the connector by gently pullinginterconnect cable from the motherboard.
[* black] To reconnect during reinstallation, align the cable with the socket and use your finger
to press down on one side, followed by the right.
[* icon_note] Applying too much force may result in damaging
other. If done correctly, the black connector and/orcable should be firmly held in place by the cablesocket.
[* red] Usingblack] Use the point of a blue plastic opening tool, detachspudger to pry up and disconnect the connector by gently pullinginterconnect cable from the motherboard.
[* black] To reconnect during reinstallation, align the cable with the socket and use your finger
to press down on one side, followed by the right.
[* icon_note] Applying too much force may result in damaging
other. If done correctly, the black connector and/orcable should be firmly held in place by the cablesocket.

Image 1

Old Version

New Version

Image 2

Old Version

New Version