Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Before
After
Unchanged

Step Lines

[* black] With a suction handle you can lift the display a little bit to create a gap.
[*
black] Insert wisdom herejust the tip of an opening pick in the gap and steadily slide it along the edge towards the top. You may need to go back and forth a few times.
[* black] Try to get around the corner and behind the top part of the display. Re-position the suction handle if needed.
[* black] Leave the opening pick behind the display to avoid the re-sealing of the adhesive
.
[* black] With a suction handle you can lift the display a little bit to create a gap.
[*
black] Insert wisdom herejust the tip of an opening pick in the gap and steadily slide it along the edge towards the top. You may need to go back and forth a few times.
[* black] Try to get around the corner and behind the top part of the display. Re-position the suction handle if needed.
[* black] Leave the opening pick behind the display to avoid the re-sealing of the adhesive
.