Skip to main content

Changes to Step #8

Edit by Xavier Jiang

Edit approved by Xavier Jiang

Before
After
Unchanged

Step Lines

[* black] Now, lift that big slab of battery off. (basically taking everything you can out of the thing.) Then the fan.
-[* yellow] You shouldn't mix electricity with water at ALL TIMES, but the thing that made my fan and cooling fin clean like new, is a stream of water from a tap.
-[* green] Just make sure they are 200% dry before connecting them to power.
+[* yellow] The screw in this picture is a big white one (it may be not), because you end up with one extra big white one after using up all the multi-layer holes.
+[* green] Now it's a good time to wash the fan. (it's okay to do it with water, I did it that way.) Just make sure they are 200% dry before connecting them to power.
[* black] Take out those speakers--those are going to get into your way when you try to lift off the motherboard.
-[* black] Then take out the big, green pieces of boards of wonder.
-[* red] PHOTO UPLOAD EMMINENT
-[* icon_caution] FURTHER CONTENT UNDER CONSTRUCTION
+[* black] Pictured are the proper wiring of the left and right speakers. (ESPECIALLY the right sided one -- the one on the motherboard)

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added