Skip to main content

Changes to Step #6

Edit by Xavier Jiang

Edit approved by Xavier Jiang

Before
After
Unchanged

Step Lines

-[* black] Now. Before you want to use your common sense to dive in deep, disconnect EVERYTHING you can disconnect.
-[* black] battery, ribbon cables for touchpad, MB--DB ribbon cable, speakers, the power socket, the fan, the antenna, the SSD (not really necessary, but you can), the display.
-[* black] No RAM slots. too bad. But 4 GB was enough for the day.
+[* black] Now. Before you want to use your common sense to dive in deep, disconnect the wires.
+[* black] At least the ribbon cable for the data board, the power socket, and the batteries.
[* black] Don't forget about the keyboard's TWO wires-the "keys" and the backlight. I snagged my backlight cable (not due to unawareness of its presense).
[* black] Use a tweezer/opener on the cable housing, but it's OKAY to use hand as long as you are gentle.
-[* black] Anyway, remove ALL screws you have access to, and group them (the big ones, the medium ones, the black small ones, the black medium ones, etc.)
+[* black] Remove the screws as you go through, but KEEP THEM!

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added